Home › Yukon › Ross River Water Hardness › Water Quality
Is Ross River Water Safe to Drink?
Ross River Dena · 2017 data · official source
This is the safety page for Ross River — how hard the water is (and what that costs) lives on the Ross River water hardness page · see how Ross River compares across all of Yukon on the Yukon hardness guide · or browse every Yukon city by safety status on the Yukon water quality page.
Ross River water meets all Health Canada legal limits. Each of the 1 tested contaminants below sits under its limit — most by a wide margin.
The one real caveat: lead and copper usually enter from a home's own plumbing, not the treated supply. If your home was built before the mid-1950s, older service lines and solder are the thing to check — not the water coming out of the treatment plant.
Why it's safe
- ✓ Continuous monitoring — Ross River Dena tests the water around the clock for microbiological safety and routinely for chemical parameters.
- ✓ Regulated to Health Canada limits — enforced under Health Canada (GCDWQ MAC/AO).
- ✓ Disinfected — chlorine or chloramine keeps the supply safe from bacteria from the treatment plant to your tap.
What's in Ross River's water
Detected contaminants reported for Ross River Dena.
Source: Yukon Government — public water supply system report.
Every detected contaminant is below the health limit. Levels shown are typical (median) readings from municipal test results; occasional individual samples can run higher.
How to read this table: the legal limit (Health Canada's Maximum Acceptable Concentration (MAC)) is the enforceable safety line — it's what regulators actually require. A contaminant above its aesthetic guideline (like iron or sodium) affects taste or staining — not your health.
| Contaminant | Typical level | Health Canada limit | Status |
|---|---|---|---|
| Arsenic | — µg/L | no guideline | No guideline |
Levels are typical (median) municipal test results. The legal limit is Health Canada's Maximum Acceptable Concentration (MAC).
Not sure what these levels mean for your health? Read our complete contaminants guide — what's detected vs. what matters, and how to read the numbers.
What actually matters in Ross River's water
Most of the numbers in the table are below the legal limit and aren't worth your worry. Here's the honest read on the ones people actually ask about in Ross River:
Why the limit exists: Arsenic is a Group 1 human carcinogen (IARC). The limit is based on increased risk of bladder, lung, and skin cancer, plus skin damage and circulatory problems at elevated long-term exposure.
Source: EPA MCL / HC MAC
Where Ross River's water comes from — and how it's treated
Groundwater (well system)
Like every Canadian municipal supply, Ross River's water is disinfected (typically chlorine or chloramine) and monitored against Health Canada's Guidelines for Canadian Drinking Water Quality, enforced provincially. If you want to read the raw report for yourself, our how to read your water quality report guide walks you through it line by line.
"My Ross River water tastes or smells like chlorine — is it still safe?"
Yes. A chlorine taste or smell doesn't mean the water is unsafe — it's the residual disinfectant doing its job (preventing bacteria from re-growing between the treatment plant and your tap). Occasional earthy or musty tastes in late summer are usually from naturally occurring algae in the source water, not a safety problem. If the taste bothers you, a simple activated-carbon pitcher filter removes it without any safety concern — the water was already safe before you filtered it.
Water quality vs. water hardness — don't confuse the two
"Water quality" (is it safe to drink) and "water hardness" (how much scale it leaves) are entirely different things — and confusing them leads to bad purchases. Ross River's water is very hard (16.6 GPG), which has no bearing on its safety — hardness is a cosmetic and appliance concern, not a health one. For what that hardness costs you in scale, appliance wear, and water-heater efficiency, see the Ross River water hardness page.
If contaminants concern you — add a drinking-water filter
Should you filter Ross River's water?
The softener handles hardness; a drinking-water filter removes Arsenic — if Ross River's reported levels concern you. EPA: Arsenic is a known human carcinogen (skin, lung, bladder cancer) and, at exposure, is also linked to cardiovascular disease and developmental effects. EPA MCL: 10 ppb. For a full breakdown of what each filter type removes, see best whole-house water filters.
We may earn a commission when you buy through links on our site. This doesn't affect our recommendations. Full disclosure.
When to call a professional
Ross River's water meets every legal limit, so there's nothing that requires a pro — but clean, good-tasting water is always worth a little peace of mind, and your home's plumbing is its own variable. The clearest reason to call a licensed plumber: if your home was built before the mid-1950s and may still have lead service lines or solder — the lead risk lives in your pipes, not the city's water. Beyond that, a professional can test your tap (not just the city-wide report) and tell you honestly whether any treatment would actually improve what your household drinks.
Certified, independent results come from a state/province-licensed lab, not a company with a sales incentive — ask for a lab that reports to Health Canada or your province.
Frequently asked questions
Is Ross River tap water safe to drink?
Yes. Ross River's municipal water meets all Health Canada legal limits — every detected contaminant is below the limit. Lead is the main thing to watch, and it usually comes from a home's own plumbing, not the treated supply.
Who tests Ross River's water, and how often?
Ross River Dena samples and reports under provincial drinking-water regulations, tested continuously for microbiological safety and routinely for chemical parameters. Results are summarized in the provincial and municipal reports linked on this page.
Where does Ross River drinking water come from?
Groundwater (well system)
Should I filter Ross River's tap water?
For most people, no — the water already meets all legal limits. A filter is worth considering only if you're on older plumbing (lead/copper), have a compromised immune system, or dislike the taste/chlorine.
Is Ross River water hard?
Ross River water is very hard at 16.6 GPG (283 ppm). Hardness is separate from safety — it affects scale and appliances, not health. See the Ross River water hardness page for the full picture.
Sources & method
All contaminant levels are drawn from official, published data — Yukon Government — public water supply system report (source). We cite the legal limit for each contaminant so you never see a bare scare number.
- · Ross River Dena — water-quality report we reviewed
- · Health Canada — Guidelines for Canadian Drinking Water Quality
- · Government of Canada — Water quality
- · USGS — Water Hardness
- · Water Quality Association — Scale & Hardness
- · EPA — Drinking Water Regulations
- · Our complete contaminants guide (what's detected vs. what matters, how limits are set)
- · How to read your water quality report — line by line
Compare Ross River to Other Yukon Cities
How Ross River's water quality stacks up against nearby cities — same Yukon data, same legal limits.
Other Safe-to-Drink Water Cities
Ross River is one of many cities whose water meets every health limit. Here are a few more to compare.
Explore More
💧 Don’t rely on old numbers
These numbers change as new data comes out. Get notified when they get updated, and get our take on what to do about it. Unsubscribe anytime.
💧 Water treatment pros: this page is yours to share
This page helps customers understand what's in their water and whether they need a filter — so they can weigh whether service is worth it. We recommend sharing this page along with our complete contaminants guide in your next quote or follow-up to fully explain the value of your services.