Home › Yukon › Burwash Landing Water Hardness › Water Quality

Is Burwash Landing Water Safe to Drink?

Kluane First Nation · 2017 data · official source

Water droplet with a checkmark — Burwash Landing water safe to drink — Burwash Landing, YT

This is the safety page for Burwash Landing — how hard the water is (and what that costs) lives on the Burwash Landing water hardness page · see how Burwash Landing compares across all of Yukon on the Yukon hardness guide · or browse every Yukon city by safety status on the Yukon water quality page.

✓ Safe to drink — but one thing worth knowing

Burwash Landing water meets all Health Canada health limits — nothing in it is a health risk. But Manganese runs above its aesthetic guideline (of 2 detected contaminants), which means staining, a metallic taste, or similar cosmetic effects — not a safety problem.

If those cosmetic effects bother you, a simple filter clears them up. The water itself is safe to drink.

Why it's safe

  • ✓ Continuous monitoring — Kluane First Nation tests the water around the clock for microbiological safety and routinely for chemical parameters.
  • ✓ Regulated to Health Canada limits — enforced under Health Canada (GCDWQ MAC/AO).
  • ✓ Disinfected — chlorine or chloramine keeps the supply safe from bacteria from the treatment plant to your tap.

What's in Burwash Landing's water

Detected contaminants reported for Kluane First Nation.

Source: Yukon Government — Source Water Supply Protection Study (Tetra Tech, 2017), Sec 5.8/5.11.

✓ Meets all Health Canada legal limits

Every detected contaminant is below the health limit. Manganese runs above its aesthetic guideline (staining/taste only, not health).

How to read this table: the legal limit (Health Canada's Maximum Acceptable Concentration (MAC)) is the enforceable safety line — it's what regulators actually require. A contaminant above its aesthetic guideline (like iron or sodium) affects taste or staining — not your health.

● Below limit — below its legal MAC limit● Above limit — above the legal MAC limit● Above aesthetic — above an aesthetic guideline (taste/staining, not health)
ContaminantTypical levelHealth Canada limitStatus
Manganese0.059 mg/L0.05 mg/LAbove aesthetic
Iron0.154 mg/L0.3 mg/LBelow limit

Levels are typical (median) municipal test results. The legal limit is Health Canada's Maximum Acceptable Concentration (MAC).

Not sure what these levels mean for your health? Read our complete contaminants guide — what's detected vs. what matters, and how to read the numbers.

What actually matters in Burwash Landing's water

Laboratory test vial with magnifying glass — Burwash Landing water contaminant testing — Burwash Landing water testing

Most of the numbers in the table are below the legal limit and aren't worth your worry. Here's the honest read on the ones people actually ask about in Burwash Landing:

Manganese — 0.059 mg/L vs 0.05 mg/L (aesthetic objective) (HC AO / EPA SMCL) — ABOVE LIMIT

Why the limit exists: Manganese is mostly an aesthetic concern (black staining, bitter taste) at typical levels. Note: the very young and elderly may be more sensitive to manganese at high exposure, so Health Canada also sets a health-based limit above the aesthetic objective.
This is an aesthetic measure — not a health hazard.
Source: HC AO / EPA SMCL

Iron — 0.154 mg/L vs 0.3 mg/L (aesthetic objective) (HC AO / EPA SMCL)

Why the limit exists: Iron above the objective is an AESTHETIC concern, not a health risk — it causes reddish-brown staining, a metallic taste, and can clog fixtures and promote iron bacteria. It does not pose a health hazard like lead or arsenic.
This is an aesthetic measure — not a health hazard.
Source: HC AO / EPA SMCL

Where Burwash Landing's water comes from — and how it's treated

Filtration pipeline — how Burwash Landing's water is treated — Burwash Landing water source and treatment

Groundwater (well system)

Like every Canadian municipal supply, Burwash Landing's water is disinfected (typically chlorine or chloramine) and monitored against Health Canada's Guidelines for Canadian Drinking Water Quality, enforced provincially. If you want to read the raw report for yourself, our how to read your water quality report guide walks you through it line by line.

"My Burwash Landing water tastes or smells like chlorine — is it still safe?"

Yes. A chlorine taste or smell doesn't mean the water is unsafe — it's the residual disinfectant doing its job (preventing bacteria from re-growing between the treatment plant and your tap). Occasional earthy or musty tastes in late summer are usually from naturally occurring algae in the source water, not a safety problem. If the taste bothers you, a simple activated-carbon pitcher filter removes it without any safety concern — the water was already safe before you filtered it.

Water quality vs. water hardness — don't confuse the two

"Water quality" (is it safe to drink) and "water hardness" (how much scale it leaves) are entirely different things — and confusing them leads to bad purchases. Burwash Landing's water is hard (7.6 GPG), which has no bearing on its safety — hardness is a cosmetic and appliance concern, not a health one. For what that hardness costs you in scale, appliance wear, and water-heater efficiency, see the Burwash Landing water hardness page.

If contaminants concern you — add a drinking-water filter

Should you filter Burwash Landing's water?

The softener handles hardness; a drinking-water filter removes Manganese and removes Iron — if Burwash Landing's reported levels concern you. EPA: Manganese at elevated levels is associated with neurological effects, particularly in infants and the elderly. Health Canada: Iron above the guideline is an aesthetic concern, not a health risk — it causes reddish-brown staining, a metallic taste, and can clog fixtures, but it isn't a health hazard the way lead or arsenic are. Health Canada's aesthetic objective for iron is 0.3 mg/L. For a full breakdown of what each filter type removes, see best whole-house water filters.

See whole-house water filters →Point-of-use filters on Amazon

We may earn a commission when you buy through links on our site. This doesn't affect our recommendations. Full disclosure.

When to call a professional

This is a cosmetic issue, not a safety one — but that doesn't mean it isn't worth a look. If the Manganese staining or taste bothers you, a plumber or water-treatment technician can install a simple iron/point-of-use filter that clears it up, or assess whether a softener is the right fit for your home and pipes. A store-bought filter handles most cases, but having a pro test your own tap is a reasonable step if you want certainty about exactly what's coming out your fixtures.

Certified, independent results come from a state/province-licensed lab, not a company with a sales incentive — ask for a lab that reports to Health Canada or your province.

Frequently asked questions

Is Burwash Landing tap water safe to drink?

Yes. Burwash Landing's municipal water meets all Health Canada legal limits — every detected contaminant is below the limit. Lead is the main thing to watch, and it usually comes from a home's own plumbing, not the treated supply.

Who tests Burwash Landing's water, and how often?

Kluane First Nation samples and reports under provincial drinking-water regulations, tested continuously for microbiological safety and routinely for chemical parameters. Results are summarized in the provincial and municipal reports linked on this page.

Where does Burwash Landing drinking water come from?

Groundwater (well system)

Should I filter Burwash Landing's tap water?

For most people, no — the water already meets all legal limits. A filter is worth considering only if you're on older plumbing (lead/copper), have a compromised immune system, or dislike the taste/chlorine.

Is Burwash Landing water hard?

Burwash Landing water is hard at 7.6 GPG (130 ppm). Hardness is separate from safety — it affects scale and appliances, not health. See the Burwash Landing water hardness page for the full picture.

Sources & method

All contaminant levels are drawn from official, published data — Yukon Government — Source Water Supply Protection Study (Tetra Tech, 2017), Sec 5.8/5.11 (source). We cite the legal limit for each contaminant so you never see a bare scare number.

Compare Burwash Landing to Other Yukon Cities

How Burwash Landing's water quality stacks up against nearby cities — same Yukon data, same legal limits.

Other Safe-to-Drink Water Cities

Burwash Landing is one of many cities whose water meets every health limit. Here are a few more to compare.

Explore More

💧 Don’t rely on old numbers

These numbers change as new data comes out. Get notified when they get updated, and get our take on what to do about it. Unsubscribe anytime.

💧 Water treatment pros: this page is yours to share

This page helps customers understand what's in their water and whether they need a filter — so they can weigh whether service is worth it. We recommend sharing this page along with our complete contaminants guide in your next quote or follow-up to fully explain the value of your services.